The XPA125B Comes with a built-in automatic antenna tuner. The XPA125B can be used as an antenna tuner only. The maximum tuning range: 14-500Ω.
The XPA125B requires only 5 watts input to output 100 watts. This will allow you to reach further than without the amplifier.
This amplifier is compatible with the X5105, G90, CS108G, X108G, and G1M
You should have the CE-19 to work with the X5105, G90 and G1M.
10.24 Inches x 6.30 inches x 2.56 inches
What is in the box besides the amplifier
1 x Xiegu XPA125B 100W Linear Power Amplifier
1 x Control Cable for Xiegu Transceivers
1 x DC Power Cable
1 x USB Cable for PC Connection
1 x User Manual
Supply voltage: 12V~14.5V DCOperating frequency: 0.5~54MHz
Input power: ≤5W
Maximum output RF power: 1.8-30MHz ≥110W | 50-54MHz ≥ 90W
Maximum Ambient Operation Temp: 131 Fahrenheit(55 Celsius)
Gain: 13 dB (+/-2dB)
Spurious Suppression: >50 dB
Supply Voltage: 12-15 Volts DC
Transmit Current Draw at maximm output power: 30 Amps
ATU Frequency Range: 1.8-30 MHz & 50-54 MHz
ATU Tuning Range: 14-500 Ohms
4 Reviews Hide Reviews Show Reviews
The ant tuner needs the G 90 set on NFM IN ORDER to work. This was not stated any where. In fact the instructions said to place the G 90 on CW. Other than that it is a 10.
The only problem I have had so far with this amp was getting the ant tuner to work. I finally discovered that I needed to set my G90 on “NFM” not CW to get the tuner to respond.
Great amp that is easy to setup and use. Glad I bought it
Plugged it into my CE-19 and my G90 talks to it beautifully. If you have a G90 and a CE-19 then all you need is to attach your preferred method of power connecter to the end of the supplied power connector and you will be ready to run with shoes on!